Engineered Performance for Audi, VW, Porsche & Skoda

APR is pleased to present the ultimate ECU Upgrade for the 1.8 TSI Valve Lift engine. After months of long nights and many hours of testing, development and more testing, we are pleased to offer you an ECU recalibration that is second to none. APR's extensive research and development provides you with a powerful ECU Upgrade with no loss of drivability or reliability. Expect huge increases in low-end torque, improved throttle response and a smoother, more powerful top end.
 
The APR 1.8 TSI Valve Lift ECU Upgrade is an expertly recalibrated engine control strategy that remaps the boost pressure, timing and air fuel ratios to provide smooth and reliable power as if intended by the OEM. APR's ECU Upgrade is developed to work within the OEM and Tier 1 Supplier specifications for engine component stress tolerances and performance specifications. APR's ECU Upgrades are available in octane specific versions to allow you to take full advantage of the fuel quality available in your area. APR's patented EMCS functionality puts the control of the engine's operation at your finger tips and allows for additional features and options to be installed to your OEM ECU.
 
Stage I ECU Upgrade
 
Not only does our Stage I ECU Upgrade give you higher peak numbers of 189 horsepower (141kw) and 226lb-ft. (306nm) of torque, but also gains of up to 44 horsepower (33kw) and 60lb-ft (81nm) are available throughout the power band! APR's ECU Upgrade is the best power per dollar modification for the new 1.8 TSI and gives it just the extra edge these cars lack from the factory without pushing the limits. With factory like smoothness and drivability APR's ECU Upgrade will fill the void in an otherwise excellent car..

EMCS

EMCS is APR's revolutionary patent pending Enhanced Modular Chipping System. EMCS is an industry leading technology that brings many new features to the automotive enthusiast. This technology was developed exclusively by Audi Performance & Racing, LLC and demonstrates APR's continued commitment to lead the industry with the most technologically advanced products available.

Want chipped mode? Want to be able to switch back to your stock settings? Want a race mode to run 100 octane fuel at the track? How about a valet mode that limits power? EMCS is the lone technology on the market that can give you all of these options. No changing of the chip or ECU is required. These programs are available at the touch of a button.

APR has taken your cruise control buttons and utilized them for this function. Your cruise control will continue to function as normal, but will give you the ability to scroll through the programs you have purchased on your APR chipped ECU. The procedure is simple and involves only two steps.

Step 1: Press and hold the "set" button on your cruise control. After approximately five seconds, the "check engine" light on your dash will begin to blink once per second. This will tell you that you are activating program one. This blinking sequence will continue for approximately five seconds.

After this five second interval, the "check engine" light will begin blinking twice per second. This will indicate that you have activated the second program. This process is continued to access any remaining programs you may have purchased. (three blinks = program three, four blinks = program four).

Step 2: Once you have activated the desired program, simply release the "set" button. The "check engine" light will stop flashing. Turn the ignition key off for 10 seconds, turn the key back on, and you will be locked in that program until you change it again.

It's that simple.

APR's EMCS is a truly modular system that allows for future enhancements and features to be added as they are developed without the need for additional hardware. EMCS makes the following advanced features possible:

FlipSwitch

Enables you to swap between two or more engine programs on-the-fly using the cruise control stalk. All cars have stock and standard chipped program versions available. Valet, race-gas, and other specialty programs are available for some models.

Fault Code Erase/Throttle Body Alignment (FCE/TBA) Fault Code Erase allows you to erase and reset engine related trouble codes without having to use a specialty tool. Throttle Body Alignment allows you to manually perform throttle-body adaptation.

Security Lockout

Prevents unauthorized personnel from accessing EMCS functions. The user may select any 1 to 4 digit security code. The security code is entered using the cruise control buttons.

User Reprogramming and Reconfiguration

Gives the user the ability to reprogram their ECU with the latest software updates and to reconfigure their ECU for different preferences or features. This function requires the optional programming adaptor.

Anti-Theft

Anti-Theft can render your car immobile to thieves, even if the there is an attempt to start the car with your own key! For more information about Anti-Theft, click here.

 

EMCS PRICING

All APR chips now include EMCS hardware. EMCS options are available at an additional cost over the normal price of a chip. Please remember that even if you do not purchase any of the following options, you will still be able upgrade to these options from most any internet accessible computer at a later date. Above the price of the chip for your car, the following options can be added to your ECU:

Pricing
APR ECU Upgrade with Two Programs	A$1550
Single additional Programs>	A$250
Two additional Programs	A$500
Fault Code Erase/Throttle Body Alignment (FCE/TBA)	A$170
Security Lockout	A$170
Anti-Theft	A$420
All Prices Include GST (10%)

 
Contact Us for more details.